krw bearing-DIESEL Tapered roller bearing

Your location:Home Products Wheel Bearing Tapered roller bearing DIESEL Tapered roller bearing 33205

DIESEL Tapered roller bearing

//www.jrzc-bearings.com/uploadfiles/128.1.164.27/webid1949/source/202210/166564799439.jpg

DIESEL Tapered roller bearing 33205

Tapered roller bearings are used for transmission parts such as front and rear wheel hubs, bevel gears, differentials, and reducers of automobiles. Our model：33205 d/mm:25 D/mm:52 B/mm:22

Inquiry Now

DIESEL Tapered roller bearing 33205

Tapered roller bearings are used for transmission parts such as front and rear wheel hubs, bevel gears, differentials, and reducers of automobiles. Our model：33205 d/mm:25 D/mm:52 B/mm:22

Inquiry Now

Product Database

Product Detail

Wheel bearings support the weight of the vehicle and allow the tires to turn smoothly.

They are important because they have a major impact on safety,ride comfort and fuel efficiency. At the same time, their working

environment is more complicated, and they have higher requirements on the material of the bearing.

25mm

52mm

22mm

0.2kg

Marca	OEM
MERCEDES BENZ	39811005
MERCEDES BENZ	006 981 5805
MERCEDES BENZ	003 981 9505
MERCEDES BENZ	003 981 1505
MERCEDES BENZ	003 981 1005
MERCEDES BENZ	69815805
MERCEDES BENZ	39819505
MERCEDES BENZ	39811505
RENAULT	5001852654

Competitor
Competitor P/N
FERSA 33205 F
ISO T2DE025
PFI 33205
SKF VKHB 2057
SNR
HDB138
ASH ASH 33205J

Detail

1.Rotating speed
The allowable speed of the bearing is 0.3-0.5 times the limit speed of the bearing under the environment of correct installation and good lubrication. Under normal circumstances, 0.2 times the limit speed is the most appropriate.
2.Tilt angle
Bearings allow an inclination angle, tapered roller bearings generally do not allow the shaft to be inclined relative to the housing hole, if there is an inclination, the maximum should not exceed 2 degrees.
3.Temperature
Bearing allowable temperature, under normal load, and the lubricant has high-temperature resistance, and sufficient lubrication conditions, the general bearing is allowed to work at an ambient temperature of -30 degrees Celsius to 150 degrees Celsius.