DIESEL Tapered roller bearing

Your location:Home Products Wheel Bearing Tapered roller bearing DIESEL Tapered roller bearing 32204

//www.jrzc-bearings.com/uploadfiles/128.1.164.27/webid1949/source/202210/166571711521.jpg

DIESEL Tapered roller bearing 32204

Tapered roller bearings are used for transmission parts such as front and rear wheel hubs, bevel gears, differentials, and reducers of automobiles. Our model：32204 d/mm:20 D/mm:47 B/mm:19.25

Inquiry Now

DIESEL Tapered roller bearing 32204

Tapered roller bearings are used for transmission parts such as front and rear wheel hubs, bevel gears, differentials, and reducers of automobiles. Our model：32204 d/mm:20 D/mm:47 B/mm:19.25

Inquiry Now

Product Database

Product Detail

Wheel bearings support the weight of the vehicle and allow the tires to turn smoothly.

They are important because they have a major impact on safety,ride comfort and fuel efficiency. At the same time, their working

environment is more complicated, and they have higher requirements on the material of the bearing.

20mm

47mm

19.25mm

0.159kg

Marca
OEM
FORD
E8BZ7F431A
GB 96051405
MAZDA 139133075

Competitor
Competitor P/N
FERSA 32204 F
ISO T2DD020
PFI 32204

Other model

Bearing No.	d/mm	D/mm	B/mm	Weight/kg
32011	50	90	23	0.563
578225	21.43	50.005	17	0.171
13687/21	38.1	69.012	19.05	0.296
1252L	60	95	23
44649/10	26.98	50.29	14.224	0.12
11949/10	19.05	45.237	15.494	0.044
69349/10	38	63	17	0.071
68149/10	35	59.131	15.785	0.56
84548/10	25.4	57.15	19.431	0.089
88048/10	33.34	68.26	22.23	0.378

Detail

1.Rotating speed

The allowable speed of the bearing is 0.3-0.5 times the limit speed of the bearing under the environment of correct installation and good lubrication. Under normal circumstances, 0.2 times the limit speed is the most appropriate.

2.Tilt angle

Bearings allow an inclination angle, tapered roller bearings generally do not allow the shaft to be inclined relative to the housing hole, if there is an inclination, the maximum should not exceed 2 degrees.

3.Temperature

Bearing allowable temperature, under normal load, and the lubricant has high-temperature resistance, and sufficient lubrication conditions, the general bearing is allowed to work at an ambient temperature of -30 degrees Celsius to 150 degrees Celsius.

FotoJet (46).jpg