Bearings are precision parts, and their use must be carried out accordingly. No matter how high-performance bearings are used, if they are used improperly, the expected high performance will not be obtained. Precautions concerning the use of bearings are as follows:

1. Keep the bearing and its surrounding environment clean

Even if tiny dust invisible to the naked eye enters the bearing, it will increase the wear, vibration and noise of the bearing. Bearings and surrounding accessories should be kept clean, especially dust and dirt, tools and working environment must also be kept clean.

2. Be careful when using and installing

Strong punching is not allowed, hammers are not allowed to directly hit the bearing, and pressure is not allowed to pass through the rolling elements.

3. Use appropriate and accurate installation tools

Try to use special tools and try to avoid using things like cloth and short fibers.

4. Prevent the corrosion of the bearing

When picking up the bearing directly by hand, wash away the sweat from your hands and apply high-quality mineral oil before proceeding. Pay special attention to rust prevention during the rainy season and summer. However, under certain special operating conditions, the average life of the bearing can be extended, especially under light load conditions. This special operating condition is: when the rolling surfaces (tracks and rolling elements) are effectively and sufficiently isolated by the lubricating oil film to limit the surface damage that may be caused by contaminants.

Wafangdian Jinrui Bearing Co., Ltd. mainly produces spherical roller bearings, plug-in bearings, bearing housings, miniature deep groove ball bearings, adapter sleeves, cylindrical roller bearings, with an annual output of more than 5 million sets and an output value of more than 40 million yuan. The miniature ball bearings produced are very popular at home and abroad. From raw materials to finished products, they are in accordance with the highest national standards. If you are interested in us, we are honored to receive your inquiry.