The bearing with spherical rollers between the outer ring of the spherical raceway and the inner ring of the double raceway is called spherical roller bearing. What are its characteristics and structural types? Come and have a look!

Spherical Roller Bearing features:

Because the Outer Circle Raceway's arc center is consistent with the bearing center, this kind of bearing has a self-aligning performance, so it can automatically adjust the axis center misalignment caused by the shaft or the shell's deflection or the non-concentric. Can withstand radial load and two-way axial load. Especially the radial load capacity, suitable for bearing heavy loads and impact loads. The tapered bore bearing is easy to assemble and disassemble on the shaft by using a fastener or a release sleeve. A bearing with a tapered bore is fixed to the shaft mainly by a set sleeve or a detachable sleeve.

Spherical Roller Bearing under normal load and working conditions, the inner ring rotation, and the existence of the angle deviation are given in the table. The Spherical Roller Bearing must have two rows of rollers according to the axis, which is mainly used to bear the radial load and can bear the axial load in any direction. The bearing has high radial load capacity, especially suitable for heavy load or vibration load, but can not bear pure axial load.

The main structural type of Spherical Roller Bearing

(1) Spherical Roller bearing 2000c, 20000cc, 20000CACM and 20000TN1

(2) Spherical Roller Bearing with the tapered bore is a variant of Bearing with a cylindrical bore, which is only changed into the tapered bore. Bearing with bore taper of 1:12, postcode K, bearing with bore taper of 1:30, postcode K30. When this type of bearing is matched with the tapered journal, the inner ring moves along the axial direction to slightly adjust the radial clearance of the bearing.

(3) Spherical Roller Bearing mounted on the set sleeve Spherical Roller Bearing of taper bore with rear code K and K30 is mounted on the matching set sleeve, then becomes rear code K + H and K30 + H Bearing. The bearing can be mounted on a plain shaft without a shoulder and is suitable for situations where it is necessary to install and disassemble the bearing frequently.

JRZC was established in 2000, with 160 imported production equipment, from raw materials to finished products, from design to manufacturing of the entire production process by national standards production. If you need Spherical Roller Bearing, please feel free to contact us.