Thrust roller bearings are used to bear the combined axial and radial load, which is mainly the axial load, but the radial load shall not exceed 55% of the axial load. Compared with other thrust roller bearings, this type of bearing has a lower friction factor, higher speed, and has self-aligning performance.

Feature

Outer Ring Raceway，P5 level

The outer ring raceway is finely ground 3 times to reduce friction, P5 level and manufactured with a process equivalent to FAG.

long lasting

After the inner ring has been deburred twice, the hand feels smooth, which prevents the burr from falling off when the bearing is running and improves the service life of the bearing.

large load

The roller uses xingcheng steel and finishes 3 fine frictions, and reaches p5 level, large load

Strong material toughness.

The cage uses 80% brass content material to make the cage more tough.

Application

This type of bearing is mainly used in oil drilling rigs, steel manufacturing machinery, hydroelectric generators, vertical motors, ship propeller shafts, tower cranes, extruders, etc.

custom case

Thrust spherical roller bearings

1) Using Simn steel

2) Large load

Special bearings for hard tooth surface gearboxes

3) The following are customized models：

29432M, 29436M, 29438M, 29430M, and 29415M

If you want to customize the size, welcome to contact us.

Model Table